Note
For the most accurate list of Publications, please visit:
http://homepages.cae.wisc.edu/~zhous/
Accepted papers
- 30. Zeng, L. , Zhou, S. , , 2007 ,"Inferring the Interactions in Complex Manufacturing Processes Using Graphical Models", Technometrics, accepted
29. Zeng, L. , Zhou, S. , , 2007 ,"Variability Monitoring of Multistage Manufacturing Processes Using Regression Adjustment Methods", IIE Transactions, accepted28. Jin, N. , Zhou, S. , Chang , Huang, 2006 ,"Influential Process Variable Selection for Surface Quality Control in Hot Rolling Processes", IEEE Transactions on Automation Science and Engineering, conditionnaly accepted
2008
2007
- 26. Li, Z. , Zhou, S. , Ding, Y. , 2007 ,"Pattern Matching for Root Cause Identification of Manufacturing Processes with Consideration of General Structured Noise", IIE Transactions on Quality and Reliability Engineering, 39, pp.251?263
25. Loose, J-P. , Zhou, S. , Ceglarek, D. , 2007 ,"Kinematic Analysis of Dimensional Variation Propagation for Multistage Machining Processes with General Fixture Layouts", IEEE Transactions on Automation Science and Engineering, 4(2), pp.141-152
2006
24. Ren Y. , Ding, Y. , Zhou, S. , 2006 ,"A Data-mining Approach to Study the Significance of Nonlinearity in Multi-Station Assembly Processes", IIE Transactions on Quality and Reliability Engineering, 38, pp.1069-108323. Jin, N. , Zhou, S. , , 2006 ,"Data-Driven Variation Source Identification of Manufacturing Processes Based on Eigenspace Comparison", Naval Research Logistics, 53(5), pp.383-39622. Jin, N. , Zhou, S. , , 2006 ,"Signature Construction and Matching for Fault Diagnosis in Manufacturing Processes through Fault Space Analysis", IIE Transactions, 38,pp.341-35421. Zhou, S. , Sun, B. , Shi, J. , 2006 ,"An SPC Monitoring System for Cycle-Based Waveform Signals Using Haar Transform", IEEE Transactions on Automation Science and Engineering, 37,pp.971-98220. Li, Z. , Zhou, S. , , 2006 ,"Robust Method of Multiple Variation Sources Identification in Manufacturing Processes for Quality Improvement", ASME Transactions, Journal of Manufacturing Science and Engineering, 128(1), pp.326-336
2005
- 19. Ding, Y. , Zeng, L. , Zhou, S. , 2005 ,"Phase I Analysis for Monitoring Nonlinear Profile Signals in Manufacturing Processes", Journal of Quality Technology, 38(3), 199-216
18. Jin, J. , Guo, H. , Zhou, S. , 2005 ,"Supervisory Generalized Predictive Control Combining with Statistical Process Control for Thin Film Deposition Processes", ASME Transactions, Journal of Manufacturing Science and Engineering, 128(1), pp.315-32517. Zhou, S. , Jin, N. , Jin, J. , 2005 ,"A New Directional Variant Multivariate Control Chart System Considering Known Process Faulty Conditions", IIE Transactions, 37, pp.971-98216. Zhou, S. , Jin, J. , , 2005 ,"An Unsupervised Clustering Method For Cycle-Based Waveform Signals In Manufacturing Processes", IIE Transactions on Quality and Reliability Engineering, 37, pp.569-58415. Ding, Y. , Zhou, S. , Chen, Y. , 2005 ,"A Comparison of Process Variation Estimators for In-Process Dimensional Measurements and Control", ASME Transactions, Journal of Dynamic Systems, Measurement and Control, 127, pp.69-79
2004
- 14. Ceglarek, D. , Huang, W. , Zhou, S. , Ding, Y., Kumar, R., Zhou, Y. 2004 ,"Time-Based Competition in Multistage Manufacturing, Stream-of-Variation Methodology (SOVA) ? A Review", International Journal of Flexible Manufacturing Systems, 16, pp.11-44
13. Jin, N. , Zhou, S. , Chang, T. , 2004 ,"Identification of impacting factors of surface defects in hot rolling processes using multi-level regression analysis", Transactions of NAMRI/SME, 32, pp.557-56412. Zhou, S. , Chen, Y. , Shi, J. , 2004 ,"Root Cause Estimation and Statistical Testing for Quality Improvement of Multistage Manufacturing Processes", IEEE Transactions on Automation Science and Engineering, 1(1), pp.73-8311. Zhou, S. , Shin, K. , Dyer, S. , Shi, J., Ni, J. 2004 ,"Extended Influence Coefficient Method for Rotor Active Balancing during Acceleration", ASME Transactions, Journal of Dynamic Systems, Measurement and Control, 126, pp.219-22310. Zhou, S. , Shi, J. , , 2004 ,"Identification of Nonlinear Effects in Rotor Systems Using Recursive QR Factorization Method", Journal of Sound and Vibration, 270, pp.455 ?469
2003
- 9. Zhou, S. , Ding, Y. , Chen, Y. , Shi, J. 2003 ,"Diagnosability study of multistage manufacturing processes based on linear mixed-effects models", Technometrics, 45(4), pp.312-325
8. Zhou, S. , Huang, Q. , Shi, J. , 2003 ,"State Space Modeling of Dimensional Variation Propagation in Multistage Machining Process Using Differential Motion Vectors", IEEE Transactions on Robotics and Automation, 19(2),pp.296-309
2002
- 7. Huang, Q. , Zhou, S. , Shi, J. , 2002 ,"Diagnosis of Multi-Operational Machining Processes by Using Virtual Machining", Robotics and Computer Integrated Manufacturing, 18, pp.233 ?239
6. Zhou, S. , Shi, J. , , 2002 ,"Optimal One-Plane Active Balancing of Rigid Rotor during Acceleration", Journal of Sound and Vibration, 249(1), pp.196-205
2001
4. Zhou, S. , Shi, J. , , 2001 ,"Imbalance Estimation for Speed-Varying Rigid Rotors Using Time-Varying Observer", ASME Transactions, Journal of Dynamic Systems, Measurement, and Control, 123, pp.637-6443. Zhou, S. , Shi, J. , , 2001 ,"The Analytical Unbalance Response of Jeffcott Rotor during Acceleration", , ASME Transactions, Journal of Manufacturing Science and Engineering, Vol123, No2, pp.299-302
2000
1998
- 1. Chirikjian, G. S. , Zhou, S. , , 1998 ,"Metrics on Motion and Deformation of Solid Models", ASME Transactions, Journal of Mechanical Design, Vol120, pp.252-261
