Materials Science Program newsletter masthead

SPRING/SUMMER 2003

Larbalestier named to National Academy of Engineering

Diamond film may enable critical new sensors for bioterror

Diamond film may enable critical new sensors for bioterror

Robert Hamers

Robert Hamers (23K JPG)

Silicon wafer coated with diamond film

A silicon wafer is coated with diamond film. (14K JPG)

In this time of chronic threats of terrorism and the possibility of war with an adversary who may be armed with biological weapons, high on the wish list of security agencies and battlefield commanders is a quick and easy way to detect the presence of dangerous biological agents.

Now, with the help of a novel scheme developed by chemists at UW-Madison for chemically modifying diamond, the age of the inexpensive, compact sensor that can continuously scan airports, subways and battlefields for the slightest trace of biological weapons may be at hand. Coupled with modern electronics, the new sensors would not only be able to detect nearby biological agents, but also sound alarms and even call for help.

The new technology, which has been reported in a series of articles in scientific journals and at scientific meetings, is centered on a newfound ability to make highly stable, DNA-modified diamond films. The ability to build a stable platform that can "constantly sniff" for anything unusual — and that can be integrated with microelectronic devices — has long been a problem of surface chemistry.

"The real advance is getting the needed chemical stability and then combining that with electronic sensing," says Chemistry Professor Robert J. Hamers, a member of the university's Materials Science Program.

Hamers worked in collaboration with Chemistry Professor Lloyd Smith to develop the chemistry for the new diamond surfaces, and with Electrical and Computer Engineering Electrical and Computer Engineering Professor Dan van der Weide, also a materials science program member, to achieve the electronic sensing.

"Although there have been many advances in 'bio-chip' technologies, getting a stable platform that can be used for continuous monitoring — not just one-shot analysis — has been a long-standing problem," Hamers says. "And diamond solves it."

Biological sensors of the future will need to operate at the interface of biology and modern microelectronics. Not only must those sensors possess the ability to detect biological molecules of interest, they will also need to take advantage of the signal amplification and processing properties of microelectronics. Because diamond films can be deposited on silicon, the stuff of which computer chips and other microelectronic devices are made, it provides a bridge between the world of miniature electronics and biology, which requires a stable platform for biosensing.

Such sensors, according to Hamers, would be about the size of a postage stamp and could be sprinkled in public places such as airports, bus depots, subways, stadiums and other places where large numbers of people gather. They could act, he says, like a "bio cell phone, where they just sit in place and sniff, and when they detect something of interest, send a signal" to alert security or sound an alarm.

"This is where we are going and we are almost there. The science is there. We've proven we can make surfaces that are much more stable than anything that existed before," he says. "And we've proven that we can detect the electrical response when biomolecules bind to the diamond surface."

Hamers acknowledges that before the new biosensors become practical, significant engineering for packaging and fluid-handling systems for sample introduction must be completed. But while some work remains, he says, "the hardest part appears to be over."

In the past, scientists tried in vain to develop surfaces with long-term stability for use as biosensors. But silicon, the material upon which computer-chip technology rests, tended to defy efforts to harness it as a stable surface for sensing biological molecules.

"A widely recognized problem was that silicon oxide proved not to be a good material to do sensing on," says Hamers. "In the case of silicon, the best available technology did not permit leaving a surface in contact with water for any period of time. It eventually degrades. That was an obstacle to the merging of the microelectronic and biotechnology communities."

Other materials such as gold, glass and glassy carbon proved either unstable or difficult to integrate with silicon. The biologically modified diamond films, on the other hand, have proved to be remarkably durable, able to withstand multiple cycles of processing DNA, genetic material that can be diagnostic of such things as anthrax, ricin, bubonic plague, smallpox and other molecules that can potentially be used as biological weapons or agents of terror.

 

Materials News is published twice a year for alumni and friends of the Materials Science Program.

Send address changes and other correspondence to:

Materials Science Program
1509 University Avenue
Madison, WI 53706-1595

For HTML and other technical matters, contact:

webmaster@engr.wisc.edu

Date last modified: Monday, 07-Jul-2003 10:56:00 CDT
Date created: 07-Jul-2003

Materials News homepageMaterials Science ProgramCollege of EngineeringUW-Madison |

UW-Madison homepage Materials News homepage Materials Science Program homepage