Wisconsin Center for Applied Microelectronics  
Home :
STS Multiplex ICP Etch

Operating procedures are available:
Operations
Carrier Mounting

STS Multiplex ICP Etch

Process Description:
A relatively new method of high aspect ratio material removal is plasma etching using an inductively coupled RF source. The substrate is RF-biased independently of the inductively coupled RF plasma, which results in low ion energies and thus low ion bombardment. Consequently, an ICP system will provide high chemical etch selectivities with high etch rates.

Equipment Description:
The STS system uses fluorine-based gases for anisotropic deep silicon trench etching for research and development. The 13.56 MHz RF system produces a high-density, low- pressure, low-energy inductively coupled plasma. This type of plasma allows high selectivity and aspect ratio etching for depths greater than 250 microns. The system control is via a standard PC, which automatically loads a wafer into the process chamber. Once in the chamber, the wafer is placed onto a helium-cooled chuck during the process. The system is designed to etch a 100 mm (4 in.) wafer.
Gases and Materials:

PDF version of this page.


Copyright 2007 The Board of Regents of the University of Wisconsin System
Date last modified: 31-Oct-2001
Date created: 31-Oct-2001
Content by: rabauer@facstaff.wisc.edu
Accessibility
Web services
Thank you for visiting http://www.engr.wisc.edu/centers/wcam/stsetch.html