Engineering Mall Students Working Students Working Conference
Home || Manufacturing Systems Engineering ||College of Engineering||UW Madison ||Contact & Directions
What is QRM? | QRM in the News | Industry Partners | Projects | Members Say | Publications | Join Center | Staff

Directions to the Engineering Centers Building (ECB)

 

From Dane County Airport

  1. Exit the terminal/parking area via International Lane to Packers Ave.
  2. Turn LEFT onto Packers Ave. and continue on Packers until it becomes Pennsylvania Ave., then Johnson St. then Gorham St. (No turns, just follow the traffic flow.)
  3. Gorham will merge into University Ave.
  4. Stay in the left lane on University Ave. and proceed to Randall Ave.
  5. Turn LEFT on Randall, cross the railroad track, and take an immediate RIGHT onto Engineering Dr.
  6. Proceed one block to the end of Engineering Dr.
  7. Parking available in Lot 17 (turn LEFT at corner of ramp and proceed to staffed entrance) (see map)
  8. QRM offices are on the third floor of the Engineering Centers Building, 1550 Engineering Drive.

From North (Hwy 151)

  1. Take E. Washington Ave. into Madison
  2. Turn RIGHT onto N. Paterson St.
  3. Turn LEFT onto E. Gorham St.
  4. Merge into the left lane as Gorham becomes University Ave. near the campus
  5. Turn LEFT onto N. Randall Ave.
  6. Turn RIGHT onto Engineering Dr.
  7. Park in Lot 17 (see map)

From East (I-94)

  1. Take I-94 into Madison
  2. I-94 becomes Hwy. 30
  3. Take the E. Washington Ave. exit toward the Capitol
  4. Turn RIGHT onto N. Paterson St.
  5. Turn LEFT onto E. Gorham St.
  6. Merge into the left lane as Gorham becomes University Ave. near the campus
  7. Turn LEFT onto N. Randall Ave.
  8. Turn RIGHT onto Engineering Dr.
  9. Park in Lot 17 (see map)

From South (I-90)

  1. Take I-90 West to the Hwy 12/18 West exit
  2. Take Hwy. 12/18 West to the Park Street exit
  3. Take Park Street to University Ave.
  4. Turn LEFT onto University Ave.
  5. Take University Ave. to N. Randall Ave.
  6. Turn LEFT onto N. Randall Ave.
  7. Take N. Randall Ave. to Engineering Dr.
  8. Turn RIGHT onto Engineering Dr.
  9. Park in Lot 17 (see map)

From West (Hwy 18/151)

  1. Hwy. 18/151 becomes Verona Rd.
  2. Follow Verona Rd. under the Beltline (Hwy. 12/18)
  3. At the next stoplight, turn RIGHT on Nakoma Rd.
  4. Nakoma Rd. becomes Monroe Street
  5. Merge LEFT onto N. Randall Ave.
  6. Turn LEFT onto Engineering Dr.
  7. Park in Lot 17 (see map)

Due to the heavy construction around the New Union South and the WDI you might experience some traffic delays.

ecbmap (18K)